View CT21T20MQU_6938348.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

owners instructions color television ct29m16mqu ct25m20mqu ct29m20mqu CT21T20MQU register your product at www.samsung.com/global/register aa68-03677a-01eng_xtc 6/1/05 3:23 pm page 1 free datasheet http:///
english - 2 important warranty information regarding television format v iewing standard screen format televisions (4:3, the aspect ratio of the screen width to height) are primarily designed to view standard format full-motion video. the images displayed on them should primarily be in the standard 4:3 ratio format and constantly moving. displaying stationary graphics and images on screen, such as the dark top and bottom letterbox bars (wide screen pictures), should be limited to no more than 15% of the total television viewing per week. w ide screen format televisions (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. the images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature, and constantly moving. displaying stationary graphics and images on screen, such as the dark side-bars on non-expanded standard format television video and programming, should be limited to no more than 15% of the total television viewing per week. additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. displaying any stationary images that exceed the above guidelines can cause uneven aging of picture tubes (crts) that leave subtle, but permanent burned-in ghost images in the television picture. to avoid this, vary the pro- gramming and images, and primarily display full screen moving images, not stationary patterns or dark bars. on television models that offer picture sizing features, use these controls to view the different formats as a full screen picture. be careful in the selection and duration of television formats used for viewing. uneven crt aging as a result of format selection and use, as well as other burned-in images, is not covered by your samsung limited warranty. aa68-03677a-01eng_xtc 6/1/05 3:23 pm page 2
c ontents english - 3 chapter 1: your new tv . . . . . . . . . . . . . . . . 5 list of features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 familiarizing yourself with the tv . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 front panel buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 side panel jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 rear panel jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 remote control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 chapter 2: installation . . . . . . . . . . . . . . . . . . 9 connecting vhf and uhf antennas . . . . . . . . . . . . . . . . . . . . . . . . . . 9 antennas with 300-ohm flat twin leads . . . . . . . . . . . . . . . . 9 antennas with 75-ohm round leads . . . . . . . . . . . . . . . . . . 10 separate vhf and uhf antennas . . . . . . . . . . . . . . . . . . . . . 10 connecting cable tv . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 cable without a cable box . . . . . . . . . . . . . . . . . . . . . . . . . . 10 connecting to a cable box that descrambles all channels . . 11 connecting to a cable box that descrambles some channels 11 connecting a vcr. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 connecting an s-vhs vcr . . . . . . . . . . . . . . . . . . . . . . . . . . 14 connecting a second vcr to record from the tv. . . . . . . . . 15 connecting a dvd player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 connecting a camcorder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 installing batteries in the remote control . . . . . . . . . . . . . . . . . . . . . . 17 chapter 3: operation . . . . . . . . . . . . . . . . . . 18 tu r ning the tv on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 plug & play feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 v iewing the menus and on-screen displays . . . . . . . . . . . . . . . . . . . . 20 v iewing the menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 v iewing the display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 selecting a menu language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 memorizing the channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 selecting the video signal-source . . . . . . . . . . . . . . . . . . . . . 22 storing channels in memory (automatic method) . . . . . . . . 23 adding and erasing channels (manual method). . . . . . . . . . 24 changing channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 using the channel buttons . . . . . . . . . . . . . . . . . . . . . . . . . . 25 directly accessing channels . . . . . . . . . . . . . . . . . . . . . . . . . 25 using the pre-ch button to select the previous channel . . . 25 labeling the channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 adjusting the volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 using the mute button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 setting the clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 customizing the picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 using automatic picture settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 customizing the sound. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 using automatic sound settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 setting the blue screen mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 setting the on/off melody . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 v iewing an external signal source . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 setting the signal source. . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 assigning names to external input mode . . . . . . . . . . . . . . . 36 aa68-03677a-01eng_xtc 6/1/05 3:23 pm page 3
c ontents english - 4 chapter 4: special features. . . . . . . . . . . . . 37 changing the color tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 changing the screen size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 digital noise reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 dnie jr tm (digital natural image engine) . . . . . . . . . . . . . . . . . . 40 t ilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 using the r.surf feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 choosing a multi-channel sound (mts) soundtrack . . . . . . . . . . . . . 43 extra sound settings (auto volume, turbo sound or pseudo stereo) . . 44 setting the on/off timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 setting the sleep timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 setting the preferred volume level . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 v iewing closed captions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 v iewing the demonstration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 chapter 5: troubleshooting . . . . . . . . . . . . . 50 identifying problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 cleaning and maintaining your tv . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 using your tv in another country . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 aa68-03677a-01eng_xtc 6/1/05 3:23 pm page 4
y our n ew tv english - 5 chapter one y our n ew tv list of features y our tv was designed with the latest technology. this tv is a high-performance unit that includes the following special features: full flat screen easy-to-use remote control easy-to-use on-screen menu system ? utomatic timer to turn the tv on and off adjustable picture and sound settings that can be stored in the tvs memory automatic channel tuning for up to 181 channels ? special filter to reduce or eliminate reception problems ? built-in multi-channel sound decoder for stereo and bilingual listening built-in, dual channel speakers ? special sleep timer aa68-03677a-01eng_xtc 6/1/05 3:23 pm page 5
y our n ew tv english - 6 familiarizing yourself with the tv front panel buttons the buttons on the front panel control your tvs basic features, including the on-screen menu. to use the more advanced features, you must use the remote control. ? menu press to see an on-screen menu of your tv's features. vol ?and + press to increase or decrease the volume. also used to select items on the on- screen menu. ch and ch press to change channels. also press to select various items on the on-screen menu. y ou can use the ch or ch button, switch on the tv when it is standby mode. remote control sensor aim the remote control towards this spot on the tv. ? timer indicator when the tv is turned on, the timer indicator blinks five times. this indicator illuminates when the timer mode is set to the ?n?position after setting the clock and either the on timer or off timer, with the remote control. even if the power is turned off, this indicator stays lit. (clock must be set before using this function.) ? i (power) press to turn the tv on and off. ct29m16mqu ct25m20mqu/ct29m20mqu CT21T20MQU ct29m16mqu/ ct25m20mqu/ ct29m20mqu CT21T20MQU ? ? ? ? ? ? ? ? ? side panel jacks y ou can use the side panel jacks to connect an a/v component that is used only occa- sionally, such as a camcorder or video game. (for information on connecting equipment, see page 16.) ? audio input jacks used to connect the audio signals from a camcorder or video game. video input jack used to connect a video signal from a camcorder or video game. headphone connect a set of external head- phones to this jack for private listening. aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 6
y our n ew tv english - 7 rear panel jacks use the rear panel jacks to connect an a/v component that will be connected continuously, such as a vcr or a dvd player. because there are two sets of input jacks, you can connect two different a/v components (i.e., a vcr and a dvd, 2 vcrs, etc.) for more information on connecting equipment, see pages 9 ?15. ? video input jack v ideo signals from vcrs, dvd players and similar devices. audio inputs (input1 and 2) /dvd audio inputs (input 2) audio signals from vcrs, dvd players and similar devices. use these jacks to connect the audio signals from a dvd player when using the dvd video input jacks. when not using the dvd jacks, these audio jacks function as audio for video 2 or s-video. audio-video monitor output jacks these audio-video signals are identical to a/v signals being displayed on the big screen. (typically used as the input signals for a recording vcr.) super video input jack (ct29m16mqu/ct25m20mqu/ ct29m20mqu) s-video signal from an s-vhs vcr or dvd player. note: in s-video mode, audio output depends what kind of audio input source is connected to the side audio input jacks (av2). ? component video input jacks connect video from a dvd player. note: only black and white signals are output from a monitor in dvd mode. ? vhf/uhf connect to an antenna or to a cable tv system. aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 7
y our n ew tv english - 8 remote control y ou can use the remote control up to about 23 feet from the tv. when using the remote, always point it directly at the tv. ? power tu rns the tv on and off. number buttons press to select channels directly on the tv. +100 press to select channels over 100. for example, to select channel 121, press ?100,?then press ??and ?. mute press to temporarily cut off the sound. ? vol - , vol + press to increase or decrease the volume. ? sleep press to select a preset time inter- val for automatic shutoff. menu displays the main on-screen menu. mts (multichannel t elevision stereo) press to choose stereo, mono or separate audio program (sap broadcast). turbo press to turn the turbo sound on or off. ? pre-ch t unes to the previous channel. ? tv/video press to display all of the available video sources (i.e., antenna/cable, vcr). ? ch and ch (channel up/down) press ch or ch to change channels. info press to see the time, channel, etc., on-screen. exit press to exit the menu. ? up, down, left, right ( , , ? , )/ enter press to select highlight up, down, left, or right. while using the on- screen menus, press the enter button to activate (or change) a particular item. ? r-surf press the surf button to automati- cally return to a preferred channel after a user-preset time delay. ? ch.scan not available. aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 8
i nstallation english - 9 chapter two i nstallation connecting vhf and uhf antennas if your antenna has a set of leads that look like this, see ?ntennas with 300-ohm flat twin leads?below. if your antenna has one lead that looks like this, see ?ntennas with 75-ohm round leads? on page next. if you have two antennas, see ?eparate vhf and uhf antennas? on page next. antennas with 300-ohm flat twin leads if you are using an off-air antenna (such as a roof antenna or ?abbit ears? that has 300-ohm twin flat leads, follow the directions below. 1 place the wires from the twin leads under the screws on the 300- 75 ohm adaptor (not supplied). use a screwdriver to tighten the screws. 2 plug the adaptor into the vhf/uhf terminal on the bottom of the back panel. aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 9
i nstallation english - 10 connecting cable tv to connect to a cable tv system, follow the instructions below. cable without a cable box 1 plug the incoming cable into the vhf/uhf antenna terminal on back of the tv. because this tv is cable-ready, you do not need a cable box to view unscrambled cable channels. 2 plug the combiner into the vhf/uhf terminal on the bottom of the rear panel. separate vhf and uhf antennas if you have two separate antennas for your tv (one vhf and one uhf), you must combine the two antenna signals before connecting the antennas to the tv. this procedure requires a an optional combiner-adaptor (available at most electronics shops). 1 connect both antenna leads to the combiner. antennas with 75-ohm round leads 1 plug the antenna lead into the vhf/uhf terminal on the bottom of the back panel. aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 10
i nstallation english - 11 connecting to a cable box that descrambles all channels 1 find the cable that is connected to the antenna out terminal on your cable box. this terminal might be labeled ?nt out? ?hf out or simply, ?ut? 2 connect the other end of this cable to the vhf/uhf antenna terminal on the back of the tv. connecting to a cable box that descrambles some channels if your cable box descrambles only some channels (such as premium channels), follow the instructions below. you will need a two-way splitter, an rf (a/b) switch and four lengths of coaxial cable. (these items are available at most electronics stores.) 1 find and disconnect the cable that is connected to the antenna in terminal on your cable box. this terminal might be labeled ?nt in? ?hf in or simply, ?n? 2 connect this cable to a two-way splitter. 3 connect a coaxial cable between an output terminal on the splitter and the in terminal on the cable box. incoming cable splitter incoming cable cable box splitter aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 11
i nstallation english - 12 connecting a vcr these instructions assume that you have already connected your tv to an antenna or a cable tv system (according to the instructions on pages 9-11). skip step 1 if you have not yet connected to an antenna or a cable system. 1 unplug the cable or antenna from the back of the tv. 4 connect a coaxial cable between the antenna out terminal on the cable box and the b?n terminal on the rf(a/b) switch. 5 connect another cable between the other out terminal on the splitter and the a?n terminal on the rf (a/b) switch. 6 connect the last coaxial cable between the out terminal on the rf (a/b) switch and the vhf/uhf terminal on the rear of the tv. after you?e made this connection, set the a/b switch to the ??position for normal view- ing. set the a/b switch to the ??position to view scrambled channels. (when you set the a/b switch to ?? you will need to tune your tv to the cable boxs output channel, which is usually channel 3 or 4.) incomin g cable cable box rf (a/b) switch splitter incomin g cable cable box rf (a/b) switch splitter incomin g cable cable box rf (a/b) switch tv rear splitter 2 connect the cable or antenna to the antenna in terminal on the back of the vcr. incoming cable or antenna vcr rear panel aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 12
i nstallation english - 13 follow the instructions in ?iewing an external signal source?to view your vcr tape. note: this figure shows the standard connector-jack panel. the actual configuration for your tv may be different. 3 connect a coaxial cable between the antenna out terminal on the vcr and the antenna terminal on the tv. 4 connect a set of audio cables between the audio out jacks on the vcr and the audio jacks on the tv. 5 connect a video cable between the video out jack on the vcr and the video jack on the tv. a coaxial cable is usually included with a vcr. (if not, check your local electronics store). vcr rear panel coaxial cable tv rear panel vcr rear panel audio cable tv rear panel vcr rear panel vi deo cable tv rear panel aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 13
i nstallation english - 14 3 connect an s-video cable between the s-video out jack on the vcr and the s-video input jack on the tv. an s-video cable is usually included with an s-vhs vcr. (if not, check your local electronics store.) note: this figure shows the standard connector-jack panel. the actual configuration for your tv may be different. make sure the jacks you are using are underneath the number ?. 2 connect a set of audio cables between the audio out jacks on the vcr and the 2 audio input jacks on the tv. 1 to begin, follow steps 1? in the previous section to connect the antenna or cable to your vcr and your tv. connecting an s-vhs vcr (ct29m16mqu/ct25m20mqu/ct29m20mqu) y our samsung tv can be connected to an s-video signal from an s-vhs vcr. (this connection delivers a better picture as compared to a standard vhs vcr.) vcr rear panel coaxial cable tv rear panel vcr rear panel audio cable tv rear panel vcr rear panel vi deo cable tv rear panel aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 14
i nstallation english - 15 connecting a second vcr to record from the tv y our tv can send out signals of its picture and sound to be recorded by a second vcr. to do this, connect your second vcr as follows: 1 connect a set of audio cables between the audio out jacks on the tv and the audio in jacks on the vcr. 2 connect a video cable between the video out jack on the tv and the video in jack on the vcr. refer to your vcrs instructions for more information about how to record using this kind of connection. (the vcr input jacks might be either on the front or on back of the vcr.) connecting a dvd player the rear panel jacks on your tv make it easy to connect a dvd player to your tv. 1 connect a set of audio cables between the audio input 2 jacks on the tv and the audio out jacks on the dvd player. 2 connect a video cable between the compo- nent input (y, pb, pr) jacks on the tv and the component video out (y, pb, pr) jacks on the dvd player. vcr input panel audio cable tv rear panel vcr input panel v ideo cable tv rear panel dvd player rear panel tv rear panel audio cable dvd player rear panel tv rear panel v ideo cable note: for an explanation of component video, see your dvd player's owner's manual. note: this figure shows the standard connector-jack panel. the actual configuration for your tv may be different. aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 15
i nstallation english - 16 2 connect an audio cable between the audio output jack on the camcorder and the audio terminals on the side of the tv. 3 connect a video cable between the video output jack on the camcorder and the video terminal on the side of the tv. 1 locate the a/v output jacks on the camcorder. they are usually found on the side or back of the camcorder. connecting a camcorder the side panel jacks on your tv make it easy to connect a camcorder to your tv. they allow you to view the camcorder tapes without using a vcr. (also see ?iewing an external signal source?on page 35). the audio-video cables shown here are usually included with a camcorder. (if not, check your local electronics store.) if your camcorder is stereo, you need to connect a set of two cables. camcorder output jacks camcorder output jacks audio cable vi deo cable y -connector tv side panel camcorder output jacks tv side panel aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 16
i nstallation english - 17 3 replace the cover. remove the batteries and store them in a cool, dry place if you wont be using the remote control for a long time. the remote control can be used up to about 23 feet from the tv. (assuming typical tv usage, the batteries last for about one year.) 2 install two aaa size batteries. make sure to match the + ?and ?ends of the batteries with the diagram inside the compartment. installing batteries in the remote control 1 slide the cover out com- pletely. aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 17
o peration english - 18 o peration chapter three o peration 1 press the power button on the remote control. the message ?lug & play?is displayed. it flickers for a little while and then the ?anguage menu is automatically displayed. tu rning the tv on and off press the ? i ?button (on/off) on the front of the television. press the power button on the remote control to switch the television on. caution : one pole switch is totally not off (one line still live) if power cord is not unplugged. plug & play feature when the tv is initially powered on, five basic customer settings proceed automatically and subsequently: setting the language, video signal source, ant. input check, auto program and clock. plug & play 3 press the menu button then the ?nt input check is automatically displayed. make sure that the anten- na is connected to the tv. press the enter button and then the ?hannel menu is automatically displayed. 2 press the ? ? or button to select the desired language. adjust skip setup t ime plug & play caption language : english more ant input check auto program exit 4 press the ? ? or button to select signal source (air, std, hrc, irc). adjust skip channel auto program add/delete : deleted air/catv : air name : ---- aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 18
o peration english - 19 7 press the enter button and then press the ? ? or button to move the hour or minute. set the hour or minute by pressing the or button. (refer to ?etting the clock?on page 30.) 8 when you have finished, press the menu button. the message ?njoy your watching..?is displayed. note: plug & play feature doesnt work when in the av mode. enjoy your watching.. move adjust return time clock 12 : 00 am on timer - - : - - am off off timer - - : - - am off sleep timer : off on timer volume : 10 move enter return setup t ime plug & play caption language : english more 6 press the enter button to start ?uto program?or press the menu button to return. (refer to ?uto pro- gram?on page 25.) the tv will begin memorizing all of the available channels. auto program air 7 enter return stop 5 press the menu button and then the ?uto program?is automatically displayed. auto program air 3 enter return start 9 if you want to reset this feature (1)press the menu button. (2)press the or button to select the ?etup? then press the enter button. (3)press the or button to select ?lug & play? then press the enter button. the message ?lug & play?is dis- played. aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 19
o peration english - 20 v iewing the display the display identifies the current channel and the status of certain audio-video settings. the on-screen displays disappear after ten seconds. v iewing the menus and on-screen displays v iewing the menus 1 with the power on, press the menu button . the main menu appears on the screen. its left side has five icons: input, picture, sound, channel and setup. the on-screen menus disappear from the screen after two minutes. y ou can also use the menu , ch and vol buttons on the control panel of the tv to make selections. 1 press the info button. the on-screen display shows any or all of the following: active channel, the channel label, signal, picture mode, sound mode, mts and the current time. 2 use the and buttons to highlight one of the 5 icons. then press the enter button to access the icons sub-menu. 3 press the exit button to exit. move enter exit source list : tv edit name input air 10 signal : mono sound : custom picture : custom mts : stereo 12 : 00 am aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 20
o peration english - 21 selecting a menu language 1 press the menu button to display the menu. press the or button to select ?etup? then press the enter button. 3 press the ? ? or button to select the appropriate language: ?nglish? ?spa?ol?or ?ortugu?s? press the exit button to exit. move enter return setup t ime plug & play caption language : english more 2 press the or button to select ?anguage? then press the enter but- ton. mover ajuste regresar configuraci?n t iempo plug & play subt?tulos idioma : espa?ol m?s move adjust return setup t ime plug & play caption language : english more aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 21
o peration english - 22 memorizing the channels y our tv can memorize and store all of the available channels for both ?ff-air?(antenna) and cable channels. after the available channels are memorized, use the ch and ch buttons to scan through the channels. this eliminates the need to change chan- nels by entering the channel digits. there are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and delet- ing channels (manual). selecting the video signal-source before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the tv (i.e., an antenna or a cable system). 1 press the menu button to display the menu. press the or button to select ?hannel? then press the enter button 2 press the or button to select ?ir/catv? then press the enter button note: std, hrc and irc identify various types of cable tv systems. contact your local cable company to identify the type of cable system that exists in your particular area. at this point the signal source has been selected. proceed to ?toring channels in memory?(next page). move enter return channel auto program add/delete : deleted air/catv : air name : ---- move adjust return channel auto program add/delete : deleted air/catv : air name : ---- 3 repeatedly press the ? ? or button to cycle through these choices: ?ir?(antenna) ?td? ?rc?or ?rc?(all cable tv) press the exit button to exit. move adjust return channel auto program add/delete : deleted air/catv : std name : ---- aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 22
o peration english - 23 3 press the enter button to start "auto program". the tv will begin memorizing all of the available channels. after all the available channels are stored, the auto program menu reap- pears. press the menu button to skip and press the enter but- ton to stop. storing channels in memory (automatic method) the tv automatically cycles through all of the available channels and stores them in memory. this takes about one to two minutes. 2 press the or button to select ?uto program? and then press the enter button. the ?uto program?is automatically displayed. 1 first, select the correct signal source (air, std, hrc, irc). see steps 1~3 on previous page. move adjust return channel auto program add/delete : deleted air/catv : air name : ---- move enter return channel auto program add/delete : deleted air/catv : air name : ---- auto program air 3 enter return start auto program air 5 enter return stop aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 23
o peration english - 24 adding and erasing channels (manual method) first, press the ch or ch button or the number buttons to select the channel you want to add or delete. 1 press the menu button to display the menu. press the or button to select ?hannel? then press the enter button. 2 press the or button to select ?dd/delete? then press the enter button. 3 press the or button to select ?dded?or ?eleted?then press the enter button. press the exit button to exit. move enter return channel auto program add/delete : deleted air/catv : air name : ---- move enter return channel auto program add/delete : deleted air/catv : air name : ---- deleted added move enter return channel auto program add/delete : deleted air/catv : air name : ---- aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 24
o peration english - 25 changing channels using the channel buttons 1 press the ch or ch button to change channels. when you press ch or ch , the tv changes channels in sequence. you will see all the channels that the tv has memorized. (the tv must have memorized at least three channels.) y ou will not see channels that were either erased or not memorized. directly accessing channels use the number buttons to quickly tune to any channel. 1 press the number buttons to go directly to a channel. for example, to select channel 27, press ??then ?? the tv will change chan- nels when you press the second number. when you use the number buttons, you can directly select channels that were either erased or not memorized. to select a channel over 100, press the +100 button. (for channel 122, press ?100?then ? then ??) to change to single-digit channels (0?) faster, press ??before the single digit. (for channel ??press ??then ??) using the pre-ch button to select the previous channel 1 press the pre-ch button. the tv will switch to the last channel viewed. to quickly switch between two channels that are far apart, tune to one channel, then use the number button to select the second channel. then, use the pre-ch button to quickly alternate between them. aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 25
o peration english - 26 labeling the channels use this feature to assign an easy-to-remember label to any channel (i.e., ?bs? ?spn? ?bs2? ?nn1? etc.). a label consists of four fields, where each field is a let- ter, a number, ?? or a blank. when the info button is pressed, the channel label will appear next to the channel number. 1 press the ch or ch button to tune to the channel that will be labeled. 2 press the menu button to display the menu. press the or button to select ?hannel? then press the enter button. 3 press the or button to select ?ame? press the button to begin labeling. the left- most field will be highlight. (each label has four fields. see top paragraph.) 4 press the or button to select a letter, a number, ??or a blank. (pressing or button results in this sequence: a, b,...z, *, blank, 0, 1, ...9). note: you cannot select ?ame in the av mode. 5 press the button to switch to the next field, which will be highlight. select a second letter or digit using the or button, as above. repeat the process to select the last two digits. press the exit button to exit. air 11 move enter return channel auto program add/delete : deleted air/catv : air name : ---- move adjust return channel move adjust return channel move enter return channel auto program add/delete : deleted air/catv : air name : ---- auto program add/delete : deleted air/catv : air name : p --- auto program add/delete : deleted air/catv : air name : pbs2 aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 26
o peration english - 27 adjusting the volume press the vol + or ?vol ? button to increase or decrease the volume. using the mute button at any time, you can temporarily cut off the sound using the mute button. 1 press the mute button and the sound cuts off. the word ?ute?will appear in the lower-left corner of the screen. 2 to turn mute off, press the mute button to again, or simply press either the vol + or vol button. mute aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 27
o peration english - 28 setting the clock 1 press the menu button to display the menu. press the or button to select ?etup? then press the enter button. when selecting the hours, be sure to select the proper time of day (am or pm). y ou can change the hours by pressing the or button repeatedly (or by holding down either of these buttons). 3 after the hour is entered, press the button. (at this point the minutes digits will be highlighted). press the or button to select the correct minutes. after selecting the correct minutes, press the button . press the exit button to exit. the time will appear every time you press the info button. move enter return setup t ime plug & play caption language : english more move adjust return t ime clock 09 : - - am on timer - - : - - am off off timer - - : - - am off sleep timer : off on timer volume : 10 move adjust return t ime clock 09 : 30 am on timer - - : - - am off off timer - - : - - am off sleep timer : off on timer volume : 10 2 press the enter button. press the enter button again to select the hours. (the hours digits will be highlighted). press the or button repeatedly until the correct hour appears. aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 28
o peration english - 29 1 press the menu button to display the menu. press the or button to select ?icture? then press the enter button. customizing the picture y ou can use the on-screen menus to change the contrast, brightness, sharpness, color, t int and according to personal preference. (alternatively, you can use one of the ?utomatic?settings. see next page.) 4 press the ? ? or button to increase or decrease the value of a particular item. for example, if you select ?rightness? pressing the button increases it. press the exit button to exit. after adjusting an item, the gauge will automatically disappear (after about 10 seconds). 2 press the or button to select ?ustom? then press the enter button. (the words contrast, brightness, sharpness, color and tint will appear on the screen.) 3 press the or button to select a particular item, then press the enter button. move enter return mode : custom custom color tone : normal size : normal more picture move enter return contrast : 80 brightness : 50 sharpness : 50 color : 50 t int : g50 r50 custom move enter return mode : custom custom color tone : normal size : normal more picture brightness 55 move adjust return e r . aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 29
o peration english - 30 using automatic picture settings y our tv has three automatic picture settings (?ynamic? ?tandard?and ?ovie?) that are preset at the factory. you can activate either dynamic, standard, movie or custom by pressing the p.mode button (or by making a selection from the menu). or, you can select ?ustom?which automatically recalls your personalized picture settings. choose dynamic for viewing the tv during the day or when there is bright light in the room. choose standard for the standard factory settings. choose movie when viewing the movie. choose custom if you want to adjust the settings according to personal preference (see ?ustomizing the picture? page 29). 1 press the menu button to display the menu. press the or button to select ?icture? then press the enter button. 2 press the enter button again. press the or button to select the ?ynamic? ?tandard??ovie?or ?ustom?picture setting, then press the enter button. press the exit button to exit. move enter return mode : custom custom color tone : normal size : normal more picture move enter return mode : custom custom color tone : normal size : normal more picture dynamic standard movie custom aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 30
o peration english - 31 2 press the or button to select ?ustom? then press the enter button. 1 press the menu button to display the menu. press the or button to select the ?ound? then press the enter button. customizing the sound y ou can use the on-screen menus to adjust the bass, treble and balance according to individual preference. (alternatively, you can use one of the ?utomatic?settings. see next page.) 3 press the or button to select a particular item, then press the enter button. move enter return sound mode : custom custom mts : stereo auto volume : off more move enter return sound mode : custom custom mts : stereo auto volume : off more move enter return custom bass : 50 tr eble : 50 balance : l 50 r 50 4 press the ? ? or button to increase or decrease the value of a particular item. for example, if you select ?reble? pressing the button increases it. press the exit button to exit. tr eble 55 move adjust return aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 31
o peration english - 32 using automatic sound settings y our tv has four automatic sound settings (?tandard? ?usic? ?ovie?and ?peech? that are preset at the factory. you can activate either standard, music, movie or speech by pressing the s.mode button (or by making a selection from the menu). or, you can select ?ustom? which automatically recalls your personalized sound settings. choose standard for the standard factory settings. choose music when watching music videos or concerts. choose movies when watching movies. choose speech when watching a show that is mostly dialogue (i.e., news). choose custom to recall your personalized settings. (see ?ustomizing the sound? page 31). 2 press the enter button again. press the or button repeatedly to select the ?tandard? ?usic ?ovie? ?peech?or ?ustom?sound settings, then press the enter button. press the exit button to exit. 1 press the menu button to display the menu. press the or button to select the ?ound? then press the enter button. move enter return sound mode : custom custom mts : stereo auto volume : off more move enter return sound mode : custom custom mts : mono auto volume : off more standard music movie speech custom aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 32
o peration english - 33 1 press the menu button to display the menu. press the or button to select the ?etup? then press the enter button. 2 press the or button to select "blue screen", then press the enter button. 3 press the or button to select blue screen ?n? then press the enter button. press the exit button to exit. pressing the or button will alternate between ?n?and ?ff? setting the blue screen mode if no signal is being received or the signal is very weak, a blue screen automatically r eplaces the noisy picture background. if you wish to continue viewing the poor picture, you must set the ?lue screen?mode to ?ff? move enter return setup more blue screen : on melody : on demonstration move enter return setup more blue screen : on melody : on demonstration off on move enter return setup t ime plug & play caption language : english more aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 33
o peration english - 34 1 press the menu button to display the menu. press the or button to select the ?etup? then press the enter button. 2 press the or button to select ?elody? then press the enter button. setting the on/off melody y ou can hear clear a melody sound when the tv is powered on or off. move enter return setup more blue screen : on melody : on demonstration 3 press the or button to select ?n? then press the enter button. press the exit button to exit. move enter return setup more blue screen : on melody : on demonstration off on move enter return setup t ime plug & play caption language : english more aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 34
o peration english - 35 quick way to access the external signal source: just press the ?v/video?button on the remote control. v iewing an external signal source use the remote control to switch between viewing signals from connected equipment, such as vcrs, dvd, set-top box and the tv source (broadcast or cable). setting the signal source 1 press the menu button to display menu, then press the enter button. 2 press the enter button again. press the or button to select signal source, then press the enter button. press the exit button to exit. move enter return source list : tv edit name input move enter return tv av1 ---- av2 ---- s-video ---- component ---- source list av 1 aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 35
o peration english - 36 assigning names to external input mode 1 press the menu button to display menu, then press the enter button. 2 press the or button to select the ?dit name? then press the enter button. move enter return source list : tv edit name input move enter return source list : av1 edit name input 3 press the or button to select the source list, then press the enter button. move enter return av1 : ---- av2 : ---- s-video : ---- component : ---- edit name 4 press the or button to select external device ( vcr, dvd, cable stb, sat. stb, av recv, dvd recv, game, camcorder, dvd combo), then press the enter button. set other signal sources (av2, s-video, component) using the same method as listed above. press the exit button to exit. move enter return av1 : ---- av2 : ---- s-video : ---- component : ---- edit name ---- vcr dvd cable stb sat. stb av recv dvd recv game camcorder dvd combo av 1 vcr aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 36
s pecial f eatures english - 37 changing the color tone 1 press the menu button to display the menu. press the or button to select the ?icture? then press the enter but- ton. 2 press the or button to select ?olor tone? then press the enter but- ton. 3 press the or button to select ?ool2? ?ool1? ?ormal? ?arm1?or ?arm2?according to personal preference, then press the enter button. press the exit button to exit. move enter return mode : custom custom color tone : normal size : normal more picture move enter return mode : custom custom color tone : normal size : normal more picture cool2 cool1 normal w arm1 w arm2 move enter return mode : custom custom color tone : normal size : normal more picture s pecial f eatures chapter four s pecial f eatures aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 37
s pecial f eatures english - 38 ?normal (4:3) : sets the picture to 4:3 normal mode. ?zoom : magnifies the size of the picture on screen. changing the screen size 1 press the menu button to display the menu. press the or button to select the ?icture? then press the enter but- ton. 2 press the or button to select ?ize? then press the enter button. 3 press the or button to select ?ormal?or ?oom? then press the enter button. press the exit button to exit. move enter return mode : custom custom color tone : normal size : normal more picture move enter return mode : custom custom color tone : normal size : normal more picture normal zoom move enter return mode : custom custom color tone : normal size : normal more picture normal zoom aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 38
s pecial f eatures english - 39 digital noise reduction if the broadcast signal received by your tv is weak, you can activate the digital noise reduction feature to help reduce any static and ghosting that may appear on the screen. 1 press the menu button to display the menu. press the or button to select the ?icture? then press the enter but- ton. 2 press the or button to select ?igital nr? then press the enter but- ton. 3 press the or button to select ?n? then press the enter button. press the exit button to exit. pressing the or button will alternate between ?n?and ?ff? move enter return more digital nr : off picture move enter return more digital nr : off picture off on move enter return mode : custom custom color tone : normal size : normal more picture aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 39
s pecial f eatures english - 40 dnie jr tm (digital natural image engine) (ct25m20mqu/ct29m20mqu/CT21T20MQU) samsungs new technology enables an improved image with detail, contrast and white enhancement and 3d noise reduction. 1 press the menu button to display the menu. press the or button to select the ?icture? then press the enter but- ton. 2 press the or button to select "dnie jr? then press the enter button. 3 press the ? ? or button to select ?n? then press the enter button. press the exit button to exit. move enter return more digital nr : off dnie jr : on picture move enter return mode : custom custom color tone : normal size : normal more picture adjust enter return dnie jr off on aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 40
s pecial f eatures english - 41 t ilt (ct29m16mqu/ct29m20mqu) due to the earths magnetic field there may be same minor image tilt depending on the tvs location. when this occurs, follow the steps below. 1 press the menu button to display the menu. press the or button to select the ?icture? then press the enter but- ton. 2 press the or button to select ?ilt? 3 press the ? ? or button to adjust the tilt. press the exit button to exit. move adjust return more digital nr : off t ilt : 0 picture move adjust return picture move enter return mode : custom custom color tone : normal size : normal more picture more digital nr : off t ilt : 2 aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 41
s pecial f eatures english - 42 using the r.surf feature this feature allows you to set the tv to return to a particular channel after a certain amount of time. for example, you may be watching a channel when commercials start. y ou can set the r.surf to ? minutes? then switch channels. after minutes, the tv will r eturn to the original channel. to use the r.surf feature: 1 while you are watching the channel to which you want to return, press the r.surf button. the on- screen display will read ?urf off? 2 press the r.surf button again to set the timer in thirty second intervals, up to five minutes. 3 the time you set will begin counting down on the screen. when the time runs out, the tv will return to the channel you were watching when you set the timer. surf off surf 0: 30 aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 42
s pecial f eatures english - 43 choosing a multi-channel sound (mts) soundtrack depending on the particular program being broadcast, you can listen to stereo, mono, or a separate audio program. (sap audio is usually a foreign-language translation. sometimes sap has unrelated information like news or weather.) 2 press the or button to select the ?ts? then press the enter button. 3 press the or button to select ?ono? ?tereo or ?ap? then press the enter button. press the exit button to exit. the text at the bottom of the menu tells you if the incoming audio is mono, stereo or sap. 1 press the menu button to display the menu. press the or button to select the ?ound? then press the enter but- ton. choose mono for channels that are broadcasting in mono, or if you are having difficulty receiving a stereo signal. choose stereo for channels that are broadcasting in stereo. choose sap to listen to the separate audio program, which is usually a foreign-language translation. quick way to access the mts: just press the ?ts?button on the re mote control. move enter return sound mode : custom custom mts : stereo auto volume : off more move enter return sound mode : custom custom mts : mono auto volume : off more mono stereo sap move enter return sound mode : custom custom mts : stereo auto volume : off more aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 43
s pecial f eatures english - 44 extra sound settings (auto volume, turbo sound or pseudo stereo) the following sound settings can be adjusted to suit your personal preferences auto volume each broadcasting station has its own signal conditions, which can make it necessary to adjust the volume every time the channel is changed. ?uto volume?lets you automatically adjust the volume of the desired channel by lowering the sound out put when the modulation signal is high or by raising the sound output when the modulation signal is low. ? urbo sound t urbo sound emphasizes the bass and treble frequencies to add fullness to the sound. y ou can select the turbo sound by simply pressing the ?urbo?button on the remote control. pseudo stereo ?seudo stereo?converts a monaural sound signal into two identical left and right channels. once the ?seudo stereo?is set to ?n?or ?ff? the setting applies to the sound effects such as ?tandard? ?usic? ?ovie?and ?peech? 1 press the menu button to display the menu. press the or button to select the ?ound? then press the enter but- ton. 2 press the or button to select the required item (auto volume, turbo sound, pseudo stereo), then press the enter button. move enter return sound mode : custom custom mts : mono auto volume : off more off on move enter return sound mode : custom custom mts : mono auto volume : off more 3 press the or button to select ?n? then press the enter button. press the exit button to exit. move enter return sound mode : custom custom mts : mono auto volume : off more off on aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 44
s pecial f eatures english - 45 setting the on/off timer 1 press the menu button to display the menu. press the or button to select the ?etup? then press the enter button. 2 press the enter button to select ?ime? before using the timer, you must set the tvs clock. (see ?etting the clock?on page 30). when any of the timers are set, the ?imer?led will illuminate (front panel of tv.) 3 press the or button to select the ?n time? then press the enter button. press the or button repeatedly to select the appropriate hours (i.e., the hour when the tv will turn on.) move adjust return time clock 09 : 30 am on timer 06: 00am off off timer - - : - - am off sleep timer : off on timer volume : 10 move adjust return time clock 09 : 30 am on timer 06: 00am off off timer - - : - - am off sleep timer : off on timer volume : 10 4 press the button to select the minutes. (the minutes digits will be highlighted.) press the or button to select the appropriate minutes. move adjust return time clock 09 : 30 am on time 06 : 30 am off off time - - : - - am off sleep timer : off on time volume : 10 move enter return setup t ime plug & play caption language : english more aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 45
s pecial f eatures english - 46 6 to set the off time, press the or button to select ?ff time? press the button and set the hours and minutes. (follow the same proce- dure as in steps 3~5 above.) when finished setting the timer, press the exit button to exit. 1 press the sleep button on the remote control. 2 press the sleep button repeatedly until the appropriate time interval appears (any of the pre- set values from ?ff?to ?80?. after about 5 seconds, the sleep display will disappear from the screen, and the time interval will be set. setting the sleep timer the sleep timer automatically shuts off the tv after a preset time (from 30 to 180 minutes). absent power off when you set the timer ?n? your television will eventually be turned off, if you do not operate any controls during the 3 hours after the tv is turned on by timer. this function is available in only the timer ?n?mode and will prevent a leakage accident or overheating, caused by your tv left on for a long time due to the timer ?n?(when you are away on holiday, for example). move adjust return t ime clock 09 : 30 am on timer 06 : 30 am on off timer - - : - - am off sleep timer : off on timer volume : 10 move adjust return t ime clock 09 : 30 am on timer 06 : 30 am on off timer 12 : 00 pm on sleep timer : off on timer volume : 10 sleep timer : off sleep timer : 30 to deactivate the ?n time, select ?ff?during this step. move adjust return time clock 09 : 30 am on timer 06 : 30 am on off timer - - : - - am off sleep timer : off on timer volume : 10 5 press the button to select ?n?or ?ff? press the or button to turn the on-timer ?n? (repeatedly pressing the or or button will alternate between ?n?and ?ff?) when finished, press the menu button. aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 46
s pecial f eatures english - 47 setting the preferred volume level the preferred volume can be set for when the timer automatically turns on the tv. 1 press the menu button to display the menu. press the or button to select the ?etup? then press the enter button. 2 press the enter button to select ?ime? move enter return setup t ime plug & play caption language : english more 3 press the or button to select ?n time volume? press the ? ? or button to adjust volume level. press the exit button to exit. move adjust return time clock 09 : 30 am on timer 06 : 30 am on off timer 12 : 00 pm on sleep timer : off on timer volume : 15 move adjust return time clock 09 : 30 am on timer 06 : 30 am on off timer 12 : 00 pm on sleep timer : off on timer volume : 10 aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 47
s pecial f eatures english - 48 misspellings and unusual characters sometimes occur during closed caption transmissions, especially those of live events. there may be a small delay before captions appear when you change channels. these are not malfunctions of the tv. 3 press the enter button, then press the or button to turn closed captioning ?n?or ?ff? press the enter button. in caption?mode , captions appear at the bottom of the screen, and they usu- ally cover only a small portion of the picture. in t ext?mode , information unrelated to the program, such as news or weather, is displayed. text often covers a large portion of the screen. 4 press the or button to select ?ode? then press the enter button. press the or button to select ?aption?or ?ext? then press the enter button. v iewing closed captions y our tv decodes and displays the closed captions that are broadcast with certain tv shows. these captions are usually subtitles for the hearing impaired or foreign-language translations. all vcrs record the closed caption signal from television programs, so home-recorded video tapes also provide closed captions. most pre-recorded commercial video tapes provide closed captions as well. check for the closed caption symbol in your television schedule and on the tapes packaging: . 1 press the menu button to display the menu. press the or button to select the ?etup? then press the enter button. 2 press the or button to select the ?aption? then press the enter but- ton. 5 depending on the particular broadcast, it might be necessary to make changes to ?hannels?and ?ield? use the , , ? ? and buttons to make the changes. (follow the same procedure as in steps 3~4 above.) press the exit button to exit. different channels and fields display different information: field 2 carries additional information that supplements the information in field 1. (for example, channel 1 may have subtitles in english, while channel 2 has subtitles in spanish.) move enter return setup t ime plug & play caption language : english more move enter return caption caption : off mode : caption channels : 1 field : 1 off on move enter return caption caption : off mode : caption channels : 1 field : 1 caption t ext move enter return setup t ime plug & play caption language : english more aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 48
s pecial f eatures english - 49 3 each of the menu options is displayed in turn. when you wish to stop the demonstration, press any button on the remote control. press the exit button to exit. v iewing the demonstration to become familiar with the various menus provided by your television, you can view the in built demonstration. 1 press the menu button to display the menu. press the or button to select the ?etup? then press the enter button. 2 press the or button to select ?emonstration? then press the enter but- ton. move enter return setup more blue screen : on melody : on demonstration move enter exit source list : av1 edit name input move enter return setup t ime plug & play caption language : english more ally when pear usu- ed to er, is 2 d 1. 2 has aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 49
s pecial f eatures chapter five t roubleshooting english - 50 if the tv seems to have a problem, first try this list of possible problems and solutions. if none of these troubleshooting tips apply, then call your nearest service center. identifying problems problem possible solution poor picture try another channel. adjust the antenna. check all wire connections. poor sound quality. try another channel. adjust the antenna. no picture or sound. try another channel. press the tv/video button. make sure the tv is plugged in. check the antenna connections. no color, wrong colors or tints. make sure the program is broadcast in color. adjust the picture settings. if the set is moved or turned in a different direction, the power should be off for at least 30 minutes. picture rolls vertically. adjust the antenna. check all wire connections. the tv operates erratically unplug the tv for 30 seconds, then try operating it again. the tv wont turn on. make sure the wall outlet is working. aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 50
m emo english - 51 m emo appendix cleaning and maintaining your tv w ith proper care, your tv unit will give you many years of service. please follow these guidelines to get the maximum performance from your tv. placement do not place the tv near extremely hot, cold, humid or dusty places. do not place the tv near appliances with electric motors that create magnetic fields, such as vacuum cleaners. keep the ventilation openings clear; do not place the tv on a soft surface, such as cloth or paper. place the tv in a vertical position only. liquids do not handle liquids near or on the tv. liquids that spill into it can cause serious damage. cabinet never open the cabinet or touch the parts inside. ? ipe your tv with a clean, dry cloth. never use water, cleaning fluids, wax, or chemicals. do not put heavy objects on top of the cabinet. t emperature if your tv is suddenly moved from a cold to a warm place, unplug the power cord, and allow at least two hours for moisture that may have formed inside the unit to dry completely. using your tv in another country if you plan to take your tv with you to a foreign country, please be aware of the different television systems that are in use around the world. a tv designed for one system may not work properly with another system due to differences in the tv channel frequencies. specifications model v oltage frequency of operation power consumption dimensions (mm/inches) w eight (kg/ lbs) v iewing screen size ct29m16mqu ac100-240 v 50/60 hz 150 watts 766 x 558 x 586/ 30.16 x 21.97 x 23.07 41/ 90.39 676 mm ct25m20mqu ac100-240 v 50/60 hz 130 watts 656 x 472 x 511/ 25.83 x 18.58 x 20.12 29.5/65.04 590 mm ct29m20mqu ac100-240 v 50/60 hz 150 watts 730 x 485 x575/ 28.74 x 19.09 x 22.63 40/88.19 676 mm CT21T20MQU ac100-240 v 50/60 hz 120 watts 658 x 487 x 472/ 25.91 x 19.17 x 18.58 25.5/56.22 508 mm aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 51
aa68-03677a-01 aa68-03677a-01eng_xtc 6/1/05 3:24 pm page 52

▲Up To Search▲

Price & Availability of CT21T20MQU

	To Download CT21T20MQU Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .